|Home||» Products||» AC High Current||» Primary Current Injection Test Set - Single Phase ( Up to 25000Amp. and 100kVA)|
Supplied up to 25000 Amps
Electronic Parameter Monitoring
Multiple safety interlocks for the operator
Rugged in construction for site application
InterconnectingControl Cable if the unit is in two part
Trolleyif the unit is in two part
Detailed Technical Specifications
|Single Phase Primary Current Injection Test Set|
|1||I/p Voltage||220/230V Single phase or two phase 50/60HZ AC Supply|
|2||O/p Current||Up to 25000A|
|3||Capacity||Up to 100KVA|
|4||Duty Cycle||Intermittent or countinous|
|5||Control||1- The unit can be manual/motorized control for cuurent variation and push button controlled.
2- The unit can be microprocessor based complete with on board digitized panel.
3- The unit can be PLC based complte with computer, HMI memory, printer etc. for operation.
|6||Power Components||1- Step down transformer : 1 No. double wound transformer shall be used for supplying high
Current and low voltage for testing.
2 - Auto Transformer : 1 No. Motorized Auto Transformer shall be used for controlling the
output voltage from zero to maximum to control the load Current.
|7||Metering||1- Ampere meter : 1 No. Digital Ampremeter shall be provided with 0.5 classes CT to indicate
the output current. The size of the amperemeter shall be 96 sq.mm, one in case of single
2 - Voltmeter : A digital voltmeter with selector switch shall be provided to indicate the
output voltage each phase/phase to phase, if required.
3 - Line On Indicator : Neon lamp indicators are provided for input indication.
4- Main ON/OFF switch : Two pole ON/OFF is provided for input ON &OFF.
5- Option for XCT current mesurement and input current measurement.
|8||Termination||Output is brought on Copper bus-bars|
|9||Control Panel||(i) ON/OFF switch
(ii) Separate Indiaction lamp
(iii) Digital Output Ampere meter and Voltmeter.
(iv) Knob / Push button for raising and lowering the output current.
Will be suitable for Motorized operation having limit switches, lifting arrangement for
Regulating Transformer and for the whole unit, Input & Output Indicators. Will be suitable
for Motorized or manual operation having limit switches
|11||Step Down Transformer||Shall be air cooled type. Primary winding having DCC insulation and secondary winding
of bare copper strip. The unit shall be housed in a MS Sheet body supported an angle iron
frame.Output shall be brought out on Copper bus- bar of electrolyte grade.